Ø110mm - 800mm Pipe Extrusion Line for water supply , water drainage well casing pipe

1. Introduction of Product

Ø110mm-800mm Pipe Extruding Production Line for water supply, water drainage, well casing pipe

PVC pipe machine is used to produce UPVC pipe with diameter from 16 upto 800mm which are used in aspect of electric conduit, water supply, water drainage, well casing pipe, agriculature irrigation pipe and so on.

通过切换不同的模具组件，它可以在同一生产线上的某些范围内产生各种直径和各种厚度。

2.快速细节：

1. Optional to adopt conical twin screw extruder and parallel twin screw extruder
2. Speed of extruding, haul off are controlled by variable frequency inverter, stepless adjusting speed and save power consumption

3. Water cooling tank are made of high qulity stainless steel, no rusty, longer lifetime.

4. Temperature controlled by intelligent temperature controller, high precision, automatic control, save labor and easy to operate.

3.描述：

Extruder:

不 Equipment 数量 1 Automatic material feeder 1set 2 Conical double screw extruder 1set 3 Die-head 1set 4 Vacuum calibration & cooling tank 1set 5 Hauling machine 1set 6 Cutting machine 1set 7 管堆 1set 8 电气控制台 1set Auxiliary machines for your choice 9 喷墨打印机 1set 10 Mixer 1set 11 破碎机 1set 12 PVC pipe belling machine 1set 13 PVC pipe fittings injection machine 1set

4. Applications:

Mainly applying in water-supply pipe, drainage pipe, electrical threading pipe and other area.

5. Specifications:

Model	PVC-63	PVC-110	PVC-160	PVC-250	PVC-315	PVC-450	PVC-630	PVC-800
Applicable OD(mm)	16-63	20-110	50-160	75-250	110-315	200-450	315-630	500-800
Extruder model	55/110	55/110	65/132	80/156	80/156	92/188	92/188	105/216
Capacity (kg/h)	150	180	250	350	400	600	750	1300

6.竞争优势：

The production line is developed with the advanced technology of West Europe by our company. The main machine is SJSZ 51/105 or SJSZ65/132 conical twin screw extruder is equipped with double-tube single-control stainless steel spraying calibration. It avoids waste combined with the front double calibration technology to make operation more flexible. Let you enjoy economic benefit which is brought by separate-control double-tube extruding.

7.服务：

-- Before shipment, we would invite you to come to our factory to test the machines.

-- After the machine was shipped to your factory, we would send our engineer to your factory to install the machine and communicate with your engineers.

-- After the installation, we would reply to your problem within 24 hours. If you necessary, we would send our engineer to your factory according to your requirements.

8.选项

The line is mainly for producing PVC-U pipes for wire and cable.

It can extrude two pipes at one time, which enhances production efficiency dramatically.

Each pipe is hauled off and cut individually, which effectively lowers unqualified ratio in pipe production.

9.商业条款

1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment

2. Lead Time: 60 days after receiving the advance payment

3.运输：容器，简单包装（PE胶片，Salver）

4. Warranty时期：从买方工厂使用机器的那天：

（1）机械零件：12个月

(2) The electrical Parts: 6 months

5. Installations and Commissioning

（1）已发货之前进行了最新调试

(2) Overseas Commissioning and charges

如果客户要求，将发送一两个技术人员将被发送给买方，以指导设备的安装和调试。

Customers pay the charge of our technicians.

(1) Round-trip Airplane Ticket

(2) Charges of transportation, accommodation and communication

（3）技术人员的津贴为一个人每天80美元。

（4）需要解释器。

6. Spare parts:

客户需要一年的备件，我们建议客户应该购买备件。（将提供配件列表。）

7. English manual, Figuration drawing, and footing drawings are provided.